Add A Dmg To Deploystudio Trial Run On#

Its called InstallESD.dmg'. Inside that is the Lion Installer. Inside the Contents folder, there is a SharedSupport folder. Select Show Package Contents. To extract InstallESD.dmg: Locate the Install OS X Lion.app installer and right-click on it (or CTRL and mouse click).

At this point, itвЂ™s business as usual. Open AutoDMG and drag the macOS Catalina installer app from the disk image onto AutoDMG (like usual). Kicking off a workflow takes less than 4.After the disk image is created, mount the disk image. MDS 4 adds in full support for Apple Silicon Macs and Big Sur Auto Advance. My job is to take usb thumb drives with the OS X install > wipe the current HD, and write a fresh OS X to the laptop, and then set it in the вЂњready to be soldвЂќ pile.MDS 4 raises the level for Mac Deployment.

The вЂblueprintвЂ™ machine is a fresh 10.10.5 mac OS X. Also went out and bought myself a 24 port switch.I have 2 Macbook ProвЂ™s acting as the вЂblueprintвЂ™ and вЂadminвЂ™ machines. But as I needed to reformat/fresh install OS XвЂ™s at a larger volume per week, I looked into better methods.So I downloaded and installed the latest version of AppleвЂ™s вЂServerвЂ™ application. The award winning AutoDMG takes a macOS installer (10.10 or newer) and builds a system image suitable for deployment with Imagr, DeployStudio.Needless to say, this method worked fine. Remember that you must select First Disk.

Because I decided to host this image on a SSD 4 bay OWC Thunderbolt 1 drive. I saved the creation to a different location than the default (library/NetBoot/NetBootSP0). The source was the mounted drive which was the вЂBlueprintвЂ™ machine, I chose to customize the creation, added user account (so all would be default username and password).

Versus what I need it to do, which is to INSTALL the вЂBlueprintвЂ™s ImageвЂ™. Then I realized this is a boot method to RUN the вЂBlueprintвЂ™s image it captured through the network. Which I set up, and it worked. Ideally, I want to have the 'Admin' machine plugged into Port #1, and Ports 2-24 will get a new machines as fast as I can clean wipe/os x install/People had been recommending Deploy Studio, so I installed it, set up a DeployStudio Server, even вЂњCreated a DeployStudio NetBoot setвЂќ. Install works fine on about 3-5 machines, but any more than say 5 machines, the install processes ALL FREEZE.

Used the 'Restore' function, set the HFS folder, and selected my master dmg I created in the above step.This is where I'm scratching my head. These machines will never be hooked up to my switch again.Thanks to all who read this, and thanks in advance for any input and thoughts.1.) I made a master, source was my clean os x install machine 'Blueprint' booted into Target Disk Mode-this went fine, it put itself in the HFS directory within the DeployStudio folder2.) I then made a custom work flow. I want to plug in a fleet of 23, power them on holding Option, select the NetRestore Image to install on the 23вЂ™s internal harddrives, go through just the necessary prompts, which should be 1.) Choose English as default language, 2.) Confirm the hard drive listed is the install directory for the Netrestore Image.I want to come back in the room, all machines are at the log in screen, ready to be used for the first time, I power down the machines, grab 23 more and do it again, and again and again.

Again, this older process was freezing up when only using the Netrestore feature within Server. Which was wiping out a machine's current HD, and installing my image of a fresh os x install. I am trying to find a great/consistent alternative to using the NetRestore Image process.

Granted at the time I only had 1 machine to test the deploy on. Multicast can put excessive loads on the network, so isolate this network if possible (it sounds like you are already doing this).Ok so everything I did last, worked. After that completes you can image the other Macs via the net boot image & a workflow managed on the server.Try testing with a single Mac without multicast until everything is functioning. It will help to have the server setup first (that's OS X server & Deploy Studio server).Then you can net boot a Mac that is in your 'blueprint state' & use the DS GUI to image that volume(s) onto the server (I'm not sure about the recovery partition, it has been a while since I used DS). Thought Deploy Studio would solve this, but right now I'm under the impression while yes, DeployStudio could work, but I would need the Deploy Studio software on EVERY single machine I intend to reimage?Your error looks like it is running from the disk with DS installed - it can't unmountвЂ¦ something is not right.Have you been through the Deploy Studio docs?There are several ways to setup Deploy StudioвЂ¦With a netboot server or as a standalone HD as covered in the guideTo use over a network you need to make a net boot set that is capable of booting the various models, depending on how many hardware versions you have this could be several images, to do this clean install a Mac, install Deploy studio & generate a net boot set for that hardware - you will need to have access to your server so that it works рџ™‚.See 'Creating a DeployStudio NetBoot Set' in the linked doc above. It will work fine on 1-4 machines, but anything more would freeze the image install process.

Add A Dmg To Deploystudio Trial Run On

I am needing some good veteran/pro help!PS, there is much missing in the screenshots between image 3 and image 4. I beat my head against the wall for nearly 10 hours today, and 30 over the weekend. So I at least know it's 'wiping' the hard drive in the process, but not reimaging the machine(s).Can someone give me a solid idea as to why (if I used the same guide in my setup) it would have log errors and fail with the only variable being, different computers for the 'admin' & 'blueprint'. Same model of Macbook Pro.When I boot up even just one computer into the DeployStudio Netboot, it gets to the Deploy Admin screen where I select my custom workflow (which is just a restore with multicasting, skip recovery, automate.I get a long list of log error (which I will attach below) and it ends up failing, and the machine ultimately restarts to a blinking question mark white screen. Went step by step, NO room for any mismatched variables, except the actual computers I was using as the 'admin' and the 'blueprint'. Reimaged/Restarted, on to the next one.However, I did this trial run on my personal machines, but I took my notes to the office, to do the EXACT same thing.

Having the DeployStudio server on the same network switch as the clients being imaged is as you can see going to be necessary Enrolling to Profile Manager, if this is not possible then working with the network manager to either limit the speed used by multicasting, or limiting multicasting to within a single switch while still allowing Internet access might be a compromise that would work I would suggest using a standalone network switch and if possible server dedicated purely to imaging, however this means the system would not have Internet connectivity and this would prevent some possible workflow steps working e.g. Due to the above a network manager might have configured network switches to block multicast traffic either between switches or maybe even within an individual network switch Depending on how your office network is setup and the values you set for multicasting you might risk flooding the entire office network with network traffic to a level that will severely impact normal use by other users, multicast traffic could cross between all network switches

Multicasting a monolithic slab that large to lots of machines will tax any network as already mentioned.When considering deployment your choice of which method you're going to use - ie: large all-in-one image with few workflow components versus smaller image with many workflow components - will govern in some way the choice to unicast or multicast. Some Mac and PC images can get quite large, 70+GB or more. Mainly because the size of the deployment image itself which is the other side of the equation. In the large enterprise deployments I've worked in I usually stick to no more than 16 machines at a time PC or Mac anyway.